Click image to view full size image
Feature & Use:
( 1 ) Shielding gas is mixed gas, with low short-circuit current, weld pool fluidity & cracking resistance is the best., small splashing, thin slag easy to clean, adapt to thin steel plate with nice bead.
( 2 ) Adapt to single-pass welding and multi-layer welding ,belongs to GMAW wire.
( 3 ) Wide current range, but nice bead.
Notice:
1. Please use specialized welding gas, eg: purity of CO2≥99.5%, H2O≤0.005%, Ar≥99.99%. Gas flow: 20-25L/min.
2. Wind affects arc and welding pool, please take steps to block the wind.
3. There is smoke when welding, pay attention to ventilation.
4. Distance between Tip and base steel is about 15mm when current is below 250A; and 20~25mm when current is above 250A.
5. Welding materials should be stored in dry places.
6. Please check the welder ,wire feeder, gas regulator and heater before operation.
7. Please keep the percentage of mixed gas stable and keep gas pressure stay the same.
8. As to thin steel plate, downward welding in the inclined position or forward welding is recommended,(pictures are followed below).
9. Please move plastic spool and basket spool in a correct way.
XINYU XM-53
E-mail: